/ PRODUCTS / HEAVY DUTY ANCHORS / ANKERBOLTS AND ACCESSORIES / HEXAGON HEAD ANKERBOLTS GALV

HEXAGON HEAD ANKERBOLTS GALV

A hexagon head self-tapping anchor that can be used in a variety of base materials including concrete, stone, brick and block. Available in a galvanised finish to a minimum of 40 microns to give greater corrosion resistance.

Finish: Mechanical Galvanised
Material: Steel

Fast and Secure Installation

Expansion Free

Undercutting Action

Through Fixing

High Performance

Mechanical Galvanised Minimum 40µm

Data Sheet

Product Information

Concrete C20/25 To C50/60

Non-Cracked Concrete

Hollow Concrete Planks

Solid Brickwork

Concrete Block

Natural Stone

Railings and Handrails
Wooden Beams
Brackets
Pipeline and Cable Routes
Suspended Ceilings
Temporary Fastening on Sites

JCP distributors can view pricing, check stock levels and place orders on the Owlett-Jaton website.

Visit the Owlett-Jaton Website

Downloads

Data Sheet

Range Data
Installation Instructions

Shallow Embedment

Part Number	Drill Hole Diameter (d₀) mm	Thread Diameter (d_nom) mm	Anchor Length (L_H) mm	Fixture Clearance Hole (d_f) mm	Max Fixture Thickness (t_fix) mm	Min Hole Depth (h₁) mm	Embedment Depth (h_nom) mm	Min. Structure Thickness (h_c) mm	Width Across Flats (A/F) mm	Tightening Torque (T_inst) Nm
JAB08/10060G	8	10	60	12	20	55	40	120	15	40
JAB08/10100G	8	10	100	12	60	55	40	120	15	40
JAB08/10150G	8	10	150	12	110	55	40	120	15	40
JAB10/12060G	10	12	60	14	10	70	50	125	17	60
JAB10/12100G	10	12	100	14	50	70	50	125	17	60
JAB10/12150G	10	12	150	14	100	70	50	125	17	60
JAB12/14100G	12	14	100	16	40	85	60	140	19	80
JAB12/14150G	12	14	150	16	90	85	60	140	19	80
JAB12/14200G	12	14	200	16	140	85	60	140	19	80

Deep Embedment

Part Number	Drill Hole Diameter (d₀) mm	Thread Diameter (d_nom) mm	Anchor Length (L) mm	Fixture Clearance Hole (d_f) mm	Max Fixture Thickness (t_fix) mm	Min Hole Depth (h₁) mm	Embedment Depth (h_nom) mm	Min. Structure Thickness (h_c) mm	Width Across Flats (A/F) mm	Tightening Torque (T_inst) Nm
JAB08/10060G	8	10	60	12	N/A	75	60	120	15	40
JAB08/10100G	8	10	100	12	40	75	60	120	15	40
JAB08/10150G	8	10	150	12	90	75	60	120	15	40
JAB10/12060G	10	12	60	14	N/A	95	75	125	17	60
JAB10/12100G	10	12	100	14	25	95	75	125	17	60
JAB10/12150G	10	12	150	14	75	95	75	125	17	60
JAB12/14100G	12	14	100	16	10	115	90	140	19	80
JAB12/14150G	12	14	150	16	60	115	90	140	19	80
JAB12/14200G	12	14	200	16	110	115	90	140	19	80

Installation Instructions

Position fixture and drill correct diameter hole to corresponding depth by using the rotary hammer drilling mode.

Clean hole by blowing to remove drilling debris and dust.

Insert anchor through fixture into concrete using suitable impact wrench and stop before the anchor touches the fixture.

Finish by tightening with torque wrench to recommended torque.

Book a Site Test

Book Now

Training

Learn More

Design Support

Get Support

Catalogue Download

Download an electronic copy of the latest JCP catalogue. JCP distributers can request hard copies from their local sales office.

Download Catalogue