ETA PAN HEAD ANKERBOLTS A4 STAINLESS STEEL AND ALLOY STEEL

A bi-metallic A4-316 stainless steel and alloy steel ankerbolt with a carbon steel tip with leading threads to cut into concrete.

Fast and Secure Installation
Expansion Free
Undercutting Action
Through Fixing
High-Performance
ETAG 001-6
Fire Resistant Loading
Carbon Steel Tip With Leading Threads To Cut Into Concrete
Bi-Metallic
Suitable for External Use and Marine Environments

Data SheetData Sheet

Approvals

ETA accreditation
FR accreditation

Product Information

Concrete C20/25 To C50/60
Cracked Concrete
Non-Cracked Concrete
Hollow Concrete Planks
Solid Brickwork
Concrete Block
Natural Stone

  • Railings and Handrails
  • Wooden Beams
  • Brackets
  • Pipeline and Cable Routes
  • Suspended Ceilings
  • Temporary Fastening on Sites

JCP distributors can view pricing, check stock levels and place orders on the Owlett-Jaton website.

Visit the Owlett-Jaton Website

Downloads

Data SheetData Sheet

Shallow Embedment

Part Number
Drill Hole Diameter (d0) mm
Thread Diameter (dnom) mm
Anchor Length (LH) mm
Thread Length (Lth) mm
Fixture Clearance Hole (df) mm
Max Fixture Thickness (tfix) mm
Min Hole Depth (h1) mm
Embedment Depth (hnom) mm
Min. Structure Thickness (hc) mm
Head Diameter mm
Drive Size
JAB06/08050PHSS 6 8 50 45 9 5 55 45 90 16.5/3.5 Torx Drive T40
JAB06/08075PHSS 6 8 75 55 9 30 55 45 90 16.5/3.5 Torx Drive T40
JAB06/08100PHSS 6 8 100 70 9 55 55 45 90 16.5/3.5 Torx Drive T40

Deep Embedment

Part Number
Drill Hole Diameter (d0) mm
Thread Diameter (dnom) mm
Anchor Length (L) mm
Thread Length (Lth) mm
Fixture Clearance Hole (df) mm
Max Fixture Thickness (tfix) mm
Min Hole Depth (h1) mm
Embedment Depth (hnom) mm
Min. Structure Thickness (hc) mm
Head Diameter mm
Driver Size
JAB06/08050PHSS 6 8 50 45 9 N/A N/A N/A N/A 16.5/3.5 Torx Drive T40
JAB06/08075PHSS 6 8 75 55 9 N/A N/A N/A N/A 16.5/3.5 Torx Drive T40
JAB06/08100PHSS 6 8 100 70 9 30 80 70 110 16.5/3.5 Torx Drive T40

Installation Instructions

Position fixture and drill correct diameter hole to corresponding depth by using the rotary hammer drilling mode.

Clean hole by blowing to remove drilling debris and dust.

Insert anchor through fixture into concrete using suitable impact wrench (maximum power setting according to the table below).

Finish by tightening with torque wrench to recommended torque and control of complete setting by having the screw head fully in contact with the fixture part.

>

Book a Site Test

Book Now
>

Training

Learn More
>

Design Support

Get Support

Catalogue Download

Download an electronic copy of the latest JCP catalogue. JCP distributers can request hard copies from their local sales office.

Download Catalogue